IT FIT 40/220-240/1A0 CS I HE
Product family
Product family features
Output current range 250-1050 mA
Output voltage range 23-40V
DIP switches
Low LF-ripple < 3%
Product family benefits
Higher quality of light thanks to low output ripple current
High flexibility due to four different output currents
Small housing for flexible luminaire designs
High efficiency (up to 93%)
Long lasting and high reliability
Safety ensured by Inventronics (SELV)
Areas of application
Suitable for downlights, spotlights and LED panels
Suitable for indoor SELV installations
Installation and independent mounting via Cable Clamp Kit possible
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Applicable regions
APAC (excl. China, India, Japan)
CHINA
EUROPE
INDIA
MEA
SOUTH AMERICA
Approval marks
CE, CCC, ENEC, VDE
Find technical data and additional assets in our datasheet
Product Datasheet (metric units)

Technical data

Electrical data

Nominal input voltage220…240 V
Mains frequency50 / 60 Hz
Input voltage AC198…264 V1)
Nominal input current at 230 V0.234 A
Total harmonic distortion< 10 %2)
Power factor λ0.90C…0.98
Efficiency in full-load93 %3)
Device power loss3.2 W4)
Inrush current30 A5)
Max. ECG no. on circuit breaker 10 A (B)22
Max. ECG no. on circuit breaker 16 A (B)36
Surge capability (L-N)1 kV6)
Surge capability (L/N-Ground)2 kV7)
Protective conductor current<0.7 mA
Nominal output voltage23…40 V
U-OUT (working voltage)60 V
Nominal output current800 mA / 900 mA / 950 mA / 1050 mA8)
Default output current1050 mA
Output current tolerance±5 %
Output ripple current (100 Hz)< 3 %9)
Output PSTLM≤1
Output SVM≤0.4
Nominal output power18.4…42 W
Maximum output power42 W
Galvanic isolation primary/secondarySELV

1) Permitted voltage range

2) At full load, 230 V, 50 Hz / see graphs

3) at 230 V, 50 Hz

4) At 230 V, Input power 45.2 W max.

5) twidth = 150 µs (measured at 50 % Ipeak)

6) L/N

7) L/N – PE acc to EN 61547 Cluase 5.7

8) ±5%

9) Ripple average at 100 Hz

Dimensions & weight

Product weight116.00 g
Length145.0 mm
Width43.0 mm
Height28.0 mm
Mounting hole spacing, length108.0 mm
Mounting hole spacing, widthnot relevant mm
Cable cross-section, input side0.75…1.5 mm²
Cable cross-section, output side0.75…1.5 mm²
Wire preparation length, input side7…8 mm
Wire preparation length, output side7…8 mm
Cable/wire length, input sidenot relevant mm
Cable/wire length, output side2000 mm

Colors & materials

Casing materialPlastic
Product colorWhite

Temperatures & operating conditions

Ambient temperature range-20…+45 °C
Maximum temperature at tc test point70 °C1)
Max.housing temperature in case of fault110 °C
Temperature range at storage-40…+85 °C2)
Permitted rel. humidity during operation5…95 %3)

1) Measured on tc point indicated on the product label.

2) Cool down before operating

3) Non-condensing

Lifespan

ECG lifetime50000 h / 100000 h1)

1) At Tc = 70°C / 10% failure rate / At Tc = 60°C / 10% failure rate

Additional product data

EncapsulatedNo

Capabilities

Programming interfaceDipswitch
DimmableNo
Constant lumen functionNo
Max. cable length to lamp/LED module2.0 m1)
Suitable for fixtures with prot. classII
Suitable for emergency lightingNo
EL CEAG STAR compatibleNo
EL DC detection selectableNo
EL EOFi – default valueNo
EL EOFi – rated valueNo
EL Joker VoltageNo
EL stable currentNo
EL switch-over timeNo
Type of connection, input sidePush terminal
Type of connection, output sidePush terminal
Suitable for through-wiringNo
Number of channels1
Overheating protectionAutomatic reversible
Overload protectionAutomatic reversible
Short-circuit protectionAutomatic reversible
Intended for no-load operationNo
No-load proofYes

1) Output wires must be routed as close as possible to each other

Programming

Programming deviceDIPswitch
Tuner4TRONICNo
Tuner4TRONIC Field AppNo
Box programmingNo

Certificates & standards

Approval marks – approvalCE / CCC / ENEC / VDE
StandardsIEC 61347-1 / IEC 61347-2-13 / IEC 62384 / CISPR 15 / IEC 61000-3-2 / IEC 61000-3-3 / IEC 61547
Type of protectionIP20

Logistical data

Applicable regionAPAC (excl. China, India, Japan) / CHINA / EUROPE / INDIA / MEA / SOUTH AMERICA

Logistical Data

Product codeProduct descriptionPackaging unit (Pieces/Unit)Dimensions (length x width x height)VolumeGross weight
6937186110183 INVENTRONICSIT FIT 40/220-240/1A0 CS I HEShipping carton box 50 Pieces310 x 225 x 170 mm11.86 dm³123.81 g

Accessories Optional

Product descriptionAccessory nameAccessory code
IT FIT 40/220-240/1A0 CS I HEOT CABLE CLAMP D-STYLE6977770432086
IT FIT 40/220-240/1A0 CS I HEOT CABLE CLAMP D-STYLE TL6977770432109
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration:
01-09-2026
Declaration No. in SCIP database:
In work
Product code:
6937186110183
Downloads
IT FIT 40/220-240/1A0 CS I | STEP
CAD data
Size: 5Mb
IT FIT 40 CS (I) HE DIP switches
Addon Technical Information
Size: 20kb
ENEC cert_40060342_Class II_WD
Certificates
Size: 266kb
IT FIT 40 CS I HE Output currents
Addon Technical Information
Size: 68kb
IT FIT 40/220-240/1A0 CS I | 3-dim PDF
CAD data 3-dim
Size: 513kb
IT FIT CS (I) HE CE 4547531 02 151026
Mandatory Publications
Size: 437kb
UI IT FIT CS I HE
User instruction
Size: 2Mb
Inventronics Websites Privacy policy
© 2026, Inventronics. All rights reserved