OT DX 165/170-240/1A0 DIMA NFC G2 CE
Product family
Product family features
DEXAL interface based on DALI-2 communication
Current output range: 35…1,050 mA
Available with different wattage: 24 W, 40 W, 75 W, 110 W, 165 W and 200 W
AstroDIM for autonomous dimming with five independent levels (astro, time mode)
Standby power consumption: < 0.35 W
Integrated customizable thermal management (Driver Guard)
Constant Lumen Output (CLO)
Easy and fast wireless luminaire programming via NFC
Flexible current setting with one additional wire (LEDset2)
Additional LSI digital interface for connection of accessories and sensors
Product family benefits
For Zhaga Book18 Luminaires and D4i certified incl. Parts 25x + AUX
Electrical interface and data communication fully based on open standards
Fully programmable via software (DALI Interface, NFC)
Low luminous efficacy tolerance through low output current tolerance of ± 1,5 %
High surge protection: up to 10 kV in protection class I or II
Lifetime: up to 100,000 h (depending on Tc temperature, max. 10 % failure rate)
Mains input undervoltage protection
DEXAL interface (with 15V current supply on DALI-2 lines - DALI Part 250)
SELV DEXAL and 24V AUX interface (DALI Part 150) up to 6W
Standardized DALI-2 communication (incl. monitoring data, energy metering)
Integrated ESD protection: more robust for installation on non-conductive poles
Additional built-in ESD protection (EQUI-N, LED Output-EQUI, DEXAL-EQUI)
Inventronics DALI light- and presence sensor connectable
Surge and overvoltage protection on DALI interface for DALI installations
Full compatibility with Tuner4TRONIC and T4T Field App
BOX Programming: all drivers in one BOX can be programmed in one step
Areas of application
Street and urban lighting
Industry
Suitable for outdoor applications in luminaires with IP > 54
Suitable for use in outdoor luminaires of protection class I and II
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Applicable regions
APAC (excl. China, India, Japan)
CHINA
EUROPE
MEA
Approval marks
CCC, CE, D4i, DALI-2, EL, ENEC, RCM, VDE
Find technical data and additional assets in our datasheet
Product Datasheet (metric units)

Technical data

Electrical data

Nominal input voltage220…240 V
Mains frequency0/50/60 Hz1)
Input voltage AC170…264 V2)
Input voltage DC170…276 V1)
Nominal input current at 230 V0.78 A
Total harmonic distortion< 5 %3)
Power factor λ0.98 / 0.954)
Efficiency in full-load94 %5)
Device power loss9.9 W6)
Networked standby power0.35 W7)
Inrush current3.3 A8)
Max. ECG no. on circuit breaker 10 A (B)129)
Max. ECG no. on circuit breaker 16 A (B)209)
Surge capability (L-N)6 kV10)
Surge capability (L/N-Ground)10 kV
Nominal output voltage90…260 V
U-OUT (working voltage)320 V
Nominal output current150…1050 mA
Minimum output current35 mA
Default output current700 mA
Output current tolerance±1.5 %11)
Output ripple current (100 Hz)4 %
Output PSTLM≤1
Output SVM≤0.4
Output current LEDset open70 mA
Output current LEDset shortedNot allowed
Nominal output power165 W12)
Maximum output power165 W
Auxiliary Power Supply24 V13)

1) Additional fuse needed in DC operation

2) Permitted voltage range

3) Full load, 230V, 50 Hz

4) Within the full operating window

5) at 230 V, 50 Hz

6) Maximum

7) DEXAL power supply disabled

8) At 3 ms

9) Type B

10) @ 2 Ohm, acc. to EN61547

11) ±3% for Output current lower than 150 mA

12) Max. 75% in DC operating mode

13) 3W average, 6W peak power

Dimensions & weight

Product weight790.00 g
Length150.0 mm
Width90.0 mm
Height40.0 mm
Mounting hole spacing, length134.0 mm
Cable cross-section, input side0.2…1.5 mm²1)
Cable cross-section, output side0.2…1.5 mm²2)
Wire preparation length, input side8.5…9.5 mm

1) Solid/ Flexible Leads

2) Wire cross section for LT2/NTC and LED-: 0.2…1.0 mm²

Colors & materials

Casing materialPlastic

Temperatures & operating conditions

Ambient temperature range-40…+55 °C
Maximum temperature at tc test point95 °C
Max.housing temperature in case of fault110 °C
Permitted rel. humidity during operation5…95 %1)
Temperature range at storage-40…+85 °C

1) The luminaire manufacturer must ensure that condensation water cannot be created within the fixture.

Expected Lifetime

Lifespan

ECG lifetime50000 / 100000 h1)

1) At maximum Tc = 95°C / 10% failure rate / At Tc = 85°C / 10% failure rate

Capabilities

DimmableYes
Dimming interfaceAstroDIM / DALI/DEXAL/D4i / StepDIM1)
Dimming range3…100 %
DALI-2 Diagnostic DataYes2)
DALI-2 Energy DataYes3)
Constant lumen functionYes
LEDsetYes
Max. cable length to lamp/LED module2.0 m4)
Suitable for fixtures with prot. classI / II
Suitable for emergency lightingYes
Number of channels1
Overheating protectionYes
Overload protectionYes
Short-circuit protectionYes
Intended for no-load operationNo
No-load proofYes

1) StepDIM functionality with external component 'OT DX SD BOX' only

2) Acc. DALI part 253

3) Acc. DALI part 252

4) Output wires must be routed as close as possible to each other

Programming

Programming deviceDALI / NFC
Tuner4TRONICYes
Tuner4TRONIC Field AppYes
Box programmingYes

Programmable features

DALI-2 Luminaire DataYes1)
Configuration LockYes
AstroDIMYes
StepDIMYes2)
MainsDIMNo
Driver GuardYes
Thermal ProtectionYes
Emergency ModeYes

1) Acc. DALI part 251

2) StepDIM functionality with external component 'OT DX SD BOX' only

Certificates & standards

Approval marks – approvalCCC / CE / D4i / DALI-2 / EL / ENEC / RCM / VDE
StandardsEN 61347-1 / EN 61347-2-13 / EN 62384 / EN 55015:2006 + A1:2007 + A2:2009 / EN 61547 / FCC 47 part 15 class B / IEC 61000-3-2 / IEC 61000-3-3 / IEC 62386-101 / IEC 62386-102 / IEC 62386-207 / IEC 62386-150 / IEC 62386-250 / IEC 62386-251, -252, -253
Type of protectionIP20

Logistical data

Commodity code85044083900
Applicable regionAPAC (excl. China, India, Japan) / CHINA / EUROPE / MEA

Logistical Data

Product codeProduct descriptionPackaging unit (Pieces/Unit)Dimensions (length x width x height)VolumeGross weight
6977770432765 INVENTRONICSOT DX 165/170-240/1A0 DIMA NFC G2 CEShipping carton box 12 Pieces319 x 210 x 156 mm10.45 dm³822.33 g
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration:
01-09-2026
Declaration No. in SCIP database:
In work
Product code:
6977770432765
Predecessor:
4052899631717
Downloads
OT DX NFC G2 CE CE 4486034 04 200225
Mandatory Publications
Size: 134kb
CED OT DX xx DIMA NFC G2 CE 2025-01
Certificates
Size: 134kb
VDE ENEC Certificate 40050684 INV
Certificates
Size: 271kb
Inventronics Websites Privacy policy
© 2026, Inventronics. All rights reserved