Name: OTi DALI 50/220-240/48 1CH
Brand: Inventronics
Availability: InStock

Product family features

Dimmable via Touch DIM

50 m load cable with EMI validated

Dimming range: 0.1…100 %

Line frequency: 0 Hz | 50 Hz | 60 Hz

Product family benefits
 Intelligent power matching thanks to Smart power supply
 Form factor for mounting on the cove or in luminaires
 No stroboscopic effect thanks to patented high PWM frequency management (> 2 kHz)
 Suitable for installation in emergency lighting systems according to EN 60598-2-22
 DALI message detection "LED Module failure"
 DALI part 251-252-253
 IP rating: IP20

Areas of application

Cove lighting, wall washer, corridor, handrail, luminous ceilings

Suitable for use in luminaires of protection class I and II

Equipment / Accessories

Suitable for 48 V LED modules

Ecodesign regulation information:

Intended for use with LED modules.

The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.

Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Applicable regions
 APAC (excl. China, India, Japan)
 CHINA
 EUROPE
 INDIA
 MEA
 SOUTH AMERICA

Approval marks

CE, ENEC 10, VDE-ENEC, CCC, BIS, EL, MM, RCM

Nominal input voltage	220…240 V
Mains frequency	50/60 Hz
Input voltage AC	195…264 V
Input voltage DC	176…276 V
Total harmonic distortion	< 5 %
Power factor λ	> 0.98
Efficiency in full-load	92 %
Device power loss	4.0 W
Inrush current	41 A
Max. ECG no. on circuit breaker 10 A (B)	13
Max. ECG no. on circuit breaker 16 A (B)	21
Surge capability (L/N-Ground)	2 kV
Surge capability (L-N)	1 kV
Nominal output voltage	48.2 V
U-OUT (working voltage)	48.2 V
Output PSTLM	<1
Output SVM	<0.4
Nominal output power	0...50 W
Maximum output power	50 W
Galvanic isolation	SELV
Galvanic isolation DALI/mains	Basic
Galvanic isolation DALI/output	Double
Networked standby power	<0.30 W

Length	346.0 mm
Width	32.0 mm
Height	22.0 mm
Mounting hole spacing, length	303.0 mm
Cable cross-section, input side	0.5…2.5 mm²
Cable cross-section, output side	0.5…1.5 mm²
Wire preparation length, input side	6.0 mm
Wire preparation length, output side	5.0 mm
Product weight	191.00 g

Casing material	Plastic
Product color	White

Ambient temperature range	-20…+50 °C
Maximum temperature at tc test point	80 °C
Max.housing temperature in case of fault	110 °C
Temperature range at storage	-40…85 °C
Permitted rel. humidity during operation	5…85 %

Programming interface	DALI - 2
Dimmable	Yes
Dimming interface	DALI-2
Dimming range	0.1…100 %
Dimming method	Pulse Width Modulation
DALI-2 Diagnostic Data	Yes
DALI-2 Energy Data	Yes
Max. cable length to lamp/LED module	50 m
Suitable for fixtures with prot. class	I / III
Suitable for emergency lighting	Yes
EL DC detection selectable	Yes
EL EOFi – default value	0.15
Type of connection, input side	Screw terminal
Type of connection, output side	Screw connection
Suitable for through-wiring	No
Number of channels	1
Overheating protection	Yes
Overload protection	Yes
Short-circuit protection	Yes
Intended for no-load operation	No
No-load proof	Yes

Technical data

Electrical data

Dimensions & weight

Colors & materials

Temperatures & operating conditions

Lifespan

Additional product data

Capabilities

Programming

Programmable features

Certificates & standards

Logistical data

Equipment / Accessories

Logistical Data

DALI Settings	Yes
DALI-2 Luminaire Data	Yes
TouchDIM + Sensor	Yes
Corridor Functionality	Yes

Approval marks – approval	CE / ENEC 10 / VDE-ENEC / CCC / BIS / EL / MM / RCM
Type of protection	IP20