Product family features
24 V LED strips flexible and cuttable
Luminous flux: up to 3,800 lm/m
Up to 60,000 h L90/B10 with SDT technology, tested acc. to IEC 62717 on real LED strips
Adjustable color temp. via Tunable White: 2200…3500 K, 2500…4000 K, 2700…5700 K CRI90
Adjustable color temp. via Tunable White: 2200…3500 K, 2500…3500 K, 2700…6500 K CRI80
CRI80, CRI90 options available
Stable light flux over length: active constant current regulators (ICs), PWM safe
Embedded automatic quick protection against accidental miswiring up to 25 V
Fully PWM dimmable from zero up to 2.5 kHz, audible noise free, suitable for quite places
Designed, engineered and manufactured and tested in Italy (ISO9001, ISO 17025, ACCREDIA, VDE)
Product family benefits
Color uniformity better than 3 SDCM on the entire LED strip and between strips
LED lifetime acc.to IES LM-80 and IES TM-21 standards
Excellent robustness: single reel manufacturing technology (no solder joints on strip)
Easy mounting on many smooth surfaces thanks to self-adhesive tape at the back
Extraordinary design and high quality materials
Pre-soldered wires
Areas of application
Cove lighting
Shop lighting
Offices
Equipment / Accessories
Flexessories: a complete set of aluminum channels with diffusers and lenses
Simplified connection with optional matching CONNECTsystem
OPTOTRONIC LED drivers
OPTOTRONIC LED drivers
Ecodesign regulation information:
- This product is considered to be a "containing product" in the sense of Regulations (EU) 2019/2020 and (EU) 2019/2015.
Tolerances of the reported values, are according to LED Modules Performance standard IEC/EN 62717.
In general, the replacement of the contained light sources without permanent damage to the product with the use of common available tools is possible in the final application when they can be dismantled from the installation environment and substituted for the necessary number of light sources restoring its full electrical/mechanical/thermal/optical functionality by means of a professional installer.
In the contrary, and limited to the LINEARlight Flex Diffuse, LINEARlight Rigid Finesse, GINO LED Flex Diffuse and LUMINENT Milky product families, the contained light source is an integrated part of the containing product and its removal can only be done by causing a permanent damage to the containing product due to its tight mechanical, electrical, optical, thermal interaction and/or environmental protection with or from the containing product. Therefore, a replacement of the light source with the use of common available tools is not justified.
Dismantling of light sources from containing products at end of life: Containing products with light sources which are scalable in length can be cut to the length of the contained light source and if applicable mechanically detached from protective and/or optical covers. Containing products shall be separated from building material and/or from other additional mounting accessories by means of a professional installer.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Applicable regions
APAC (excl. China, India, Japan)
CHINA
EUROPE
INDIA
MEA
NAFTA
SOUTH AMERICA
